PICKLEX® 20 - Cost or Savings?

The unit price of Picklex® 20 is only a few cents per sq. ft.

Container Sizes 5 gallons Pail 55 gallons Drum 275 gallons Tote   Part Number PIC105 PIC155 PIC275   Unit Product Cost To User 9.75 cents per sq.ft. 8.9 cents per sq.ft. 8 cents per sq.ft.

Coverage - Around 1600 sq.ft. per gallon on bare metal surface (only one very thin coat needed) 5 gallons covers = 8,000 sq.ft. 55 gallons covers = 88,000 sq.ft. 275 gallons covers = 440,000 sq.ft. Financial Benefits of Picklex 20:

1. Zero Product Cost after using the product and a lot more money comes back due to elimination of traditional steps, such as Blasting, Re-work etc.
2. Solves Rusting problems (completely removes surface rust & provide years of indoor Rust Protection), Welding failures and Adhesion failures. Zero Quality Failure, Zero Re-Work.
3. Environmentally safe, Water Based Green Product (Ready to Use), US EPA Tested/Verified
4. Works on any type of Ferrous & Non-Ferrous metal surfaces and performs 8 products job in One Step
5. Eliminates all hazardous/toxic chemicals including Blasting for new metal surface preparation before long term metal storing and Finishing
6. Complete Metal surface preparation before Welding & Finishing
7. A lot of Labor, Time, Cost & Energy Savings (makes it easier to under-bid the competitors)
8. Much higher Quality Results than the Traditional process
9. Indefinite shelf life and therefore Zero wastage of the product
10. Used by major companies such as, Lockheed Martin, Goodrich Aerospace, SpaceX, Bechtel International, Department of Transportation, Tenn.